STUDY OF INFLUENCE OF OXIDE’S PHYSICO-CHEMICAL PROPERTUIS OF TO THE FORMATION WELDING SEAM DURING A-TIG WELDING OF STAINLESS STEELS
( Pp. 10-20)

More about authors
Saidov Rustam M. кандидат технических наук; старший научный сотрудник
Institute of Materials Science of the SPA “Physics-Sun” of the Academy of Science of Uzbekistan
Tashkent, Republic of Uzbekistan Atabaev Ilkhom Gafurovich professor, direktor.
Institute of Material Science, SPA «Physics-Sun» Academy of Sciences of Uzbekistan Akhadov Jobir Zamirovich kand. tehn. nauk, starshiy nauchnyy sotrudnik.
Institute of Material science, SPA «Physics-Sun» Academy of Science of Uzbekistan; International Solar Energy Institute Komilova Durdona Rustamovna mladshiy nauchnyy sotrudnik
Institute of Material Sciences, SPA “Physics-Sun” Academy of Science of Uzbekistan Mukhitdinov Zayniddin Salokhitdinovich sotrudnik
Institute of Material science, SPA «Physics-Sun» Academy of Science of Uzbekistan Kusch Mario doktor-inzhener Departamenta proizvodstva i svarochnoy tehniki
Chemnitz University of Technology Mayr Peter professor, doktor; Departament proizvodstva i svarochnoy tehniki
Chemnitz University of Technology Hoefer Kevin inzhener Departamenta proizvodstva i svarochnoy tehniki
Chemnitz University of Technology
For read the full article, please, register or log in
Abstract:
At this article presented the researches to investigate the influence of physical-chemical properties of oxide fluxes to the formation of welding seam of stainless steel CrNi18-10 by TIG welding. The results of research work allowed determining the influence of physical-chemical properties of the individual oxide fluxes to the properties of welding seam formation of the stainless steel CrNi18-10 and influence of this properties to the morphology and mechanism action of fluxes, as well as it helped to identify recommendations to the indicated flux properties.
How to Cite:
Saidov R.M., Atabaev I.G., Akhadov J.Z., Komilova D.R., Mukhitdinov Z.S., Kusch M.., Mayr P.., Hoefer K.., (2016), STUDY OF INFLUENCE OF OXIDE’S PHYSICO-CHEMICAL PROPERTUIS OF TO THE FORMATION WELDING SEAM DURING A-TIG WELDING OF STAINLESS STEELS. Computational Nanotechnology, 4 => 10-20.
Reference list:
Ostrovskiy O.E., Kryukovskiy V.N., Buk B.B. i dr. Vliyanie aktiviruyushchikh flyusov na proplavlyayushchuyu sposobnost svarochnoy dugi i kontsentratsiyu energii v anodnom pyatne//Svarochnoe proizvodstvo. -1977. - № 3. - S. 3-4.
Savitskiy M.M., Leskov G.I. Mekhanizm vliyaniya elektrootritsatel nykh elementov na proplavlyayushchuyu sposobnost dugi s vol framovym katodom//Avtomaticheskaya svarka. -1980. - № 9. - S. 17-23.
Bukarov V.A., Ishchenko YU.S, Erokhin A.A. Nekotorye kharakteristiki dugi pri svarke stali tipa 18-8 s okislennoy poverkhnost yu//Svarochnoe proizvodstvo. - 1975. №10,.-S. 3-4.
S. Leconte, P. Paillard, P. Chapelle, G. Henrion and J. Saindrenan, Effect of oxide fluxes on activation mechanisms of tungsten inert gas process. Science and Technology of Welding and Joining 2006 VOL 11 No 4, 389-397 pp.
Simonik A.G., Petviashvili V.I., Ivanov A.A. Effekt kontraktsii dugovogo razryada pri vvedenii elektrootritsatel nykh elementov//Svarochnoe proizvodstvo. -1976.-№3.-S. 49-51.
Ishizaki K. Interfacial tension theory of arc welding phenomena: formation of welding bead. J Jpn Weld Soc 1965;34:34,
Mills KC, Keene BJ, Brooks RF, Shirali A. Marangoni effects in welding. Philos Trans R Soc A Math Phys Eng Sci 1998;356:911-25
M.Tanaka, T.Shimizu, H.Terasaki, M.Ushio, F. Koshi-ishi and C.L.Yang -Effects of activating flux on arc phenomena in gas tungsten arc welding. Science and Technology of Welding and Joining, 2000, Vol. 5, No. 6
Gurevich, V. P. Zamkov, V. E. Blashchuk i dr. Metallurgiya i tekhnologiya svarki titana i ego splavov.- Kiev.: Naukova dumka, 1986. - 240 s.
Bad yanov B.N., Dav shchov V.A., Ivanov V.A. i dr. Vybor sostava smesi dlya uvelicheniya proplavlyayushchey sposobnosti dugi//Svarochnoe proizvodstvo. - 1977, -№4.-S. 26-28.
Paton B.E., Zamkov V.N., Prilutskiy V.P. i dr. Kontraktsiya dugi flyusom pri svarke vol framovym elektrodom v argone//Avtomaticheskaya svarka. - 2000. - № 1. -S. 3-9,22.
Savitskiy M.M., Kushnirepko B.N., Oleynik O.N. Osobennosti svarki staley vol framovym elektrodom s aktiviruyushchimi flyusami//Avtomaticheskaya svarka. - 1999.-№12.-S. 18-22.
Eroshenko L.I., Prilutskiy V.P., Zamkov V.N. Izuchenie protsessov v duge pri svarke titana neplavyashchimsya elektrodom// vtomaticheskaya svarka. - 1994. - № 4. - S 3-5.
Eroshenko L.I., Prilutskiy V.P., Zamkov V.N, Issledovanie svecheniya parov anoda v duge pri svarke titana vol framovym elektrodom v argone po sloyu flyusa//Avtomaticheskaya svarka. -1997. - № 11. - S. 11-13.
Bad yanov B.N., Dav shchov V.A., Kolupaev YU.F. Izmenenie razmerov zony elektroprovodnosti dugi pri vvedenii gazoobraznykh galogenidov v argon//Avtomaticheskaya svarka. - 1977. - KH2 4. - S. 67-68.
Smirnov B.M. Szhatie polozhitel nogo stolba dugi vysokogo davleniya//Teplofizika vysokikh temperatur. -1997.-35.-KH 1.-S. 14-18.
Smirnov V.B. Otritsatel nye iony/ V.B. Smirnov. - M.: Nauka, 1978. - 756 s.
Bad yanov B.N., Dav shchov V.A., Kolupaev YU.F. Ispol zovanie gazoobraznykh galoidnykh soedineniy pri svarke plavleniem//Svarochnoe proizvodstvo. - 1982. - №4.-S. 16-17.
Bad yanov B.N., Dav shchov V.A., Kolupaev YU.F. Aktual nye problemy svarki tsvetnykh metallov//Doklady 2 Vses. konf. - Tashkent, 1982. - S. 238-240.
Bad yanov B.N., Dav shchov V.A., Ivanov V.A. Nekotorye kharakteristiki dugi, goryashchey v argone s dobavkoy galoidosoderzhashchego gaza//Avtomaticheskaya svarka. - 1974.- № 11. - S. 67.
Bukarov V.A., Ishchenko YU.S., Loshakova V.G. Vliyanie konvektsii metalla v svarochnoy vanne na proplavlenie//Svarochnoe proizvodstvo. -1978. - № 11. - S. 4-7.
Kolupaev YU. F. Issledovanie osobennostey dugovogo razryada i razrabotka tekhnologii svarki v galoidosoderzhashchikh zashchitnykh sredakh/ YU. F. Kolupaev. - Dissertatsiya k.t.n. -M.: MATI, 1982.
Erokhin A.A. Osnovy svarki plavleniem. Fiziko-khimicheskie zakonomernosti/ - M.: Mashchinostroenie, 1973. -448 s.
Paton B.E., Voropay N.M. Svarka aktivirovannym plavyashchimsya elektrodom v zashchitnom gaze//Avtomaticheskaya svarka. - 1979. - № 1. - S. 1-7.
Russo V.L., Suzdalev I.V., YAvno E.I. Vliyanie napryazheniya dugi i geometrii zatochki neplavyashchegosya elektroda na silovoe vozdeystvie dugi//Svarochnoe proizvodstvo. - 1977. - Ko 7. - S 6-8.
Erokhin A.A., Bukarov V.A., Ishchenko YU.S Vliyanie geometrii vol framovogo katoda na nekotorye kharakteristiki svarochnoy dugi i proplavlenie metalla//Svarochnoe proizvodstvo. - 1971. -№ 12. - S. 17-19.
Voropay N.M., Krivtsun I.V. Gazodipamicheskie kharakteristiki: plazmennykh potokov v svarochnykh dugakh // Magnitnaya gidrodinamika. -1978. - № 3. - S. 113-118.
Detlef f. Hofe Progressiven TechnologUin der Verbindungen//International conference. Welding and connection 2000. New materials and prospects. Israel. - 2000. - P. 23-36.
Paton B.E., Savitskiy M.M., Gvozdetskiy B.C. Primenenie aktivnykh flyusov i aktivnykh gazov dlya povysheniya effektivnosti dugovoy i plazmennoy svarki // Avtomaticheskaya svarka. - 2003. - № 5. - S. 3-6.
Pokhodnya I.K. Gazy v svarochnykh shvakh/ I. K. Pokhodnya. - M.: Mashinostroenie, 1972.-256 s.
Svarka v mashinostroenii/ Spravochnik. TL., T.Z. Pod red. Ol shanskogo P.A., Zorina YU.N. - M.: Mashinostroenie, 1978. -1979. - 504 s. - 512 s.
Savitskiy M.M., Kushnirenko B.M., Lupan A.F. Osobennosti formirovaniya shva pri svarke po sloyu aktiviruyushchego flyusa//Avtomaticheskaya svarka. - 1981. - №2.-S. 19-21.
Voropay N.M., Lebedeva O.V., Boyko V.P. Fizicheskie svoystva svarochnykh shlakov na osnove TiO2, obrazuyushchikhsya pri plavlenii aktivirovannykh provolok//Avtomaticheskaya svarka. - 1989. - № 3. - S. 19-23.
Patskevich I.R. Poverkhnostnye yavleniya v svarochnykh protsessakh/ I. R. Patskevich, G. F. Deev. - M.: Metallurgiya, 1974. -120 s.
http://chemister.ru/Database/list-substances.php substance F
G.V.Samsonov. Physico-chemical properties of oxides. Reference book. Metallurgy. 1978, 465 pp.
Greenwood, Norman N.; Earnshaw, Alan (1997). Chemistry of the Elements (2nd ed.). Butterworth-Heinemann. p. 1118. ISBN 0-08-037941-9.
Jump up Handbook of Preparative Inorganic Chemistry, 2nd Ed. Edited by G. Brauer, Academic Press, 1963, NY. p. 1520
http://mathbits.com/MathBits/TISection/Statistics2/correlation.htm
Podgaetskiy V.V. Svarochnye nshaki/ V.V. Podgaetskiy, V.G. Kuz menko. - Kiev.: Naukova dumka, 1988. - 254 s.
Parshin S.G. Tekhnologiya ruchnoy argonodugovoy svarki trub iz stali 12KHSHF s primeneniem aktiviruyushchikh flyusov/ S.G. Parshin. - Dissertatsiya k.t.n. - Tol yatti.: TPI, 2001. - 130 s.
Keywords:
argon arc welding, stainless steel, oxides, physico-chemical properties of oxides, the formation of the welds.


Related Articles

5. GENERAL ENGINEERING. NUCLEAR TECHNOLOGY. ELECTRICAL ENGINEERING Pages: 36-44 Issue №10450
STUDYING ENERGY EFFICIENCY OF A-TIG WELDING OF STAINLESS STEELS WITH USING OF INDIVIDUAL FLUX-OXIDES
argon arc welding stainless steel individual fluxes are oxides thermodynamic and physico-chemical properties of oxides energy efficiency preplasma ability of the arc
Show more
Nanotechnology and nanomaterials Pages: 73-79 DOI: 10.33693/2313-223X-2022-9-3-73-79 Issue №21873
Simulation of Aggregation Process in Cerium and Zirconium Dioxide Nanoparticles
coagulation kernel principle of minimum entropy production aggregative stability oxides
Show more
05.02.10 WELDING, RELATED PROCESSES AND TECHNOLOGIES (TECHNICAL SCIENCES) Pages: 32-38 Issue №15633
STUDY ON ENERGY EFFICIENCY OF A-TIG WELDING OF STAINLESS STEELS USING INDIVIDUAL FLUX-OXIDES. Part 2. INFLUENCE OF THERMODYNAMIC AND PHYSICO-CHEMICAL PROPERTIES OF FLUX-OXIDES
TIG welding stainless steel activating oxide fluxes arc energy efficiency termodinamical and physico-chemical properties of oxydes
Show more
2. NANOSTRUCTURED MATERIALS Pages: 25-31 Issue №4871
PHOTOLUMINESCENCE OF POROUS INDIUM PHOSPHIDE DUE TO QUANTUM TRANSITIONS IN SPACE-LIMITED LAYERS
porous indium phosphide electrochemical etching photoluminescence nanostructures oxides
Show more
05.02.10 WELDING, RELATED PROCESSES AND TECHNOLOGIES (TECHNICAL SCIENCES) Pages: 21-27 DOI: 10.336 9 3/2313-223X -2019 -6 -2-21-27 Issue №15585
STUDY ON A-TIG WELDING ENERGY EFFICIENCY OF STAINLESS STEELS USING INDIVIDUAL FLUX-OXIDES. PART 1: EVALUATION OF THE A-TIG ARC ENERGY EFFICIENCY TO THE WELD DEPTH OF PENETRATION
TIG welding stainless steel activating oxide fluxes arc energy efficiency
Show more