STUDY ON A-TIG WELDING ENERGY EFFICIENCY OF STAINLESS STEELS USING INDIVIDUAL FLUX-OXIDES. PART 1: EVALUATION OF THE A-TIG ARC ENERGY EFFICIENCY TO THE WELD DEPTH OF PENETRATION
( Pp. 21-27)
More about authors
Saidov Rustam M.
кандидат технических наук; старший научный сотрудник
Institute of Materials Science of the SPA “Physics-Sun” of the Academy of Science of Uzbekistan
Tashkent, Republic of Uzbekistan Komilova Durdona Rustamovna mladshiy nauchnyy sotrudnik
Institute of Material Sciences, SPA “Physics-Sun” Academy of Science of Uzbekistan Kusch Mario doktor-inzhener Departamenta proizvodstva i svarochnoy tehniki
Chemnitz University of Technology Mayr Peter professor, doktor; Departament proizvodstva i svarochnoy tehniki
Chemnitz University of Technology Hoefer Kevin inzhener Departamenta proizvodstva i svarochnoy tehniki
Chemnitz University of Technology
Institute of Materials Science of the SPA “Physics-Sun” of the Academy of Science of Uzbekistan
Tashkent, Republic of Uzbekistan Komilova Durdona Rustamovna mladshiy nauchnyy sotrudnik
Institute of Material Sciences, SPA “Physics-Sun” Academy of Science of Uzbekistan Kusch Mario doktor-inzhener Departamenta proizvodstva i svarochnoy tehniki
Chemnitz University of Technology Mayr Peter professor, doktor; Departament proizvodstva i svarochnoy tehniki
Chemnitz University of Technology Hoefer Kevin inzhener Departamenta proizvodstva i svarochnoy tehniki
Chemnitz University of Technology
Abstract:
This article presents the results of the study of activating oxide fluxes effects on the energy efficiency of the TIG welding arc (A-TIG) influence. This efficiency was estimated by the amount of energy spent by the arc (q) at the depth of penetration (P). It is revealed that the arc energy efficiency factor “Kepac” can be used as an indicator of the influence of arc energy on the efficiency of penetration of the welded metal, which is determined by the ratio of spent energy per unit of depth of penetration (q/P) at TIG and A-TIG welding. In accordance with the results of the research, it is observed an increase of the energy efficiency on the welding arc penetration capability of all individual oxides used as fluxes in A-TIG welding is observed. Among them, the greatest energy efficiency of the arc process on the penetration of CrNi18-10 steel is observed when oxides such as TiO2, SiO2, Cr2O3 and Co3O4 are used.
How to Cite:
Saidov R.M., Komilova D.R., Kusch M.., Mayr P.., Hoefer K.., (2019), STUDY ON A-TIG WELDING ENERGY EFFICIENCY OF STAINLESS STEELS USING INDIVIDUAL FLUX-OXIDES. PART 1: EVALUATION OF THE A-TIG ARC ENERGY EFFICIENCY TO THE WELD DEPTH OF PENETRATION. Computational Nanotechnology, 2 => 21-27.
Reference list:
Savytsky O.M. et al. Characteristics of Constructions and Reliability of Welded Structures in the Combined High-Pressure Vessels (in Ukrainian) // Research and Development in the Field of Oil and Gas. 2013. No. 2. Rp. 133-143.
Savytsky O.M., Savytsky M.M., Shkrabalyuk Y.M., Vuherer T., Baji D.R. The Influence of Electric Arc Activation on the Speed of heating and the structure of metal in welds // Thermal Science. 2016. Vol. 20. No. 1. Rp. 239-246.
Thiago Jos Doneg , Thonson Fereira Costa, Rosenda Vald s Arencibia, Louriel Oliveira Vilarinho. Comparison of thermal efficiency between A-TIG and conventional TIG welding // Welding International. 2016. Vol. 30. No. 4. Rp. 255-267.
Niles R.W., Jackson C.E. Weld Thermal Efficiency of the GTAW Process // Welding Journal. January 1975. Res. Suppl. Rp. 25-32.
Saidov R.M., Kusch M., Mayr P., Hoefer K., Akhadov J., Komilova D., Mukhitdinov Z. Study of Influence of Oxide s Physico-Chemical Propertuis to the Formation Welding Beads During A-TIG Welding of Stainless Steels (in Russian) // Computational nanotechnology. 2016. No. 4. Rp. 10-20.
Ostrovskiy O.E., Krukovskiy V.N., Buk B.B. at al. Influence on activating fluxes to the welding arc penetration property and energy concentration in anodic spot // Welding production. 1977. No. 3. Rp. 3-4.
Savitskiy M.M., Leskov G.I. Mechanism of electronegative elements on arc penetration property with tungsten cathode // Automatic welding. 1980. № 9. Rp. 17-23.
Bukarov V.A., Ishenko Yu.S., Erokhin A.A. Some characteristics of arc during steel 18-8 welding with oxidized surface // Welding production. 1975. No. 10. Rp. 3-4.
Leconte S., Paillard P., Chapelle P., Henrion G., Saindrenan J. Effect of oxide fluxes on activation mechanisms of tungsten inert gas process // Science and Technology of Welding and Joining. 2006. Vol. 11. No. 4. Rp. 389-397.
Simonik A.G., Petviashvili V.I., Ivanov A.A. The effect of arcing contraction with the introduction of electronegative elements // Welding production. 1976. No. 3. Rp. 49-51.
Ishizaki K. et al. Interfacial Tension Theory on the Phenomena of Arc Welding // J. Japan Welding Society (JWS). 1965. Vol. 34. No. 2. R. 146.
Mills K.C., Keene B.J., Brooks R.F., Shirali A. Marangoni effects in welding // Philos. Trans. R. Soc. Math. Phys. Eng. Sci. 1998. Bd. 356. No. 1739. Rp. 911-925.
Savytsky O.M., Savytsky M.M., Shkrabalyuk Y.M., Vuherer T., Baji D.R. The Influence of Electric Arc Activation on the Speed of heating and the structure of metal in welds // Thermal Science. 2016. Vol. 20. No. 1. Rp. 239-246.
Thiago Jos Doneg , Thonson Fereira Costa, Rosenda Vald s Arencibia, Louriel Oliveira Vilarinho. Comparison of thermal efficiency between A-TIG and conventional TIG welding // Welding International. 2016. Vol. 30. No. 4. Rp. 255-267.
Niles R.W., Jackson C.E. Weld Thermal Efficiency of the GTAW Process // Welding Journal. January 1975. Res. Suppl. Rp. 25-32.
Saidov R.M., Kusch M., Mayr P., Hoefer K., Akhadov J., Komilova D., Mukhitdinov Z. Study of Influence of Oxide s Physico-Chemical Propertuis to the Formation Welding Beads During A-TIG Welding of Stainless Steels (in Russian) // Computational nanotechnology. 2016. No. 4. Rp. 10-20.
Ostrovskiy O.E., Krukovskiy V.N., Buk B.B. at al. Influence on activating fluxes to the welding arc penetration property and energy concentration in anodic spot // Welding production. 1977. No. 3. Rp. 3-4.
Savitskiy M.M., Leskov G.I. Mechanism of electronegative elements on arc penetration property with tungsten cathode // Automatic welding. 1980. № 9. Rp. 17-23.
Bukarov V.A., Ishenko Yu.S., Erokhin A.A. Some characteristics of arc during steel 18-8 welding with oxidized surface // Welding production. 1975. No. 10. Rp. 3-4.
Leconte S., Paillard P., Chapelle P., Henrion G., Saindrenan J. Effect of oxide fluxes on activation mechanisms of tungsten inert gas process // Science and Technology of Welding and Joining. 2006. Vol. 11. No. 4. Rp. 389-397.
Simonik A.G., Petviashvili V.I., Ivanov A.A. The effect of arcing contraction with the introduction of electronegative elements // Welding production. 1976. No. 3. Rp. 49-51.
Ishizaki K. et al. Interfacial Tension Theory on the Phenomena of Arc Welding // J. Japan Welding Society (JWS). 1965. Vol. 34. No. 2. R. 146.
Mills K.C., Keene B.J., Brooks R.F., Shirali A. Marangoni effects in welding // Philos. Trans. R. Soc. Math. Phys. Eng. Sci. 1998. Bd. 356. No. 1739. Rp. 911-925.
Keywords:
TIG welding, stainless steel, activating oxide fluxes, arc energy efficiency.
Related Articles
1. MATERIALS SCIENCE AND MATERIALS TECHNOLOGY Pages: 10-20 Issue №8242
STUDY OF INFLUENCE OF OXIDE’S PHYSICO-CHEMICAL PROPERTUIS OF TO THE FORMATION WELDING SEAM DURING A-TIG WELDING OF STAINLESS STEELS
argon arc welding
stainless steel
oxides
physico-chemical properties of oxides
the formation of the welds
Show more
05.02.10 WELDING, RELATED PROCESSES AND TECHNOLOGIES (TECHNICAL SCIENCES) Pages: 32-38 Issue №15633
STUDY ON ENERGY EFFICIENCY OF A-TIG WELDING OF STAINLESS STEELS USING INDIVIDUAL FLUX-OXIDES. Part 2. INFLUENCE OF THERMODYNAMIC AND PHYSICO-CHEMICAL PROPERTIES OF FLUX-OXIDES
TIG welding
stainless steel
activating oxide fluxes
arc energy efficiency
termodinamical and physico-chemical properties of oxydes
Show more
5. GENERAL ENGINEERING. NUCLEAR TECHNOLOGY. ELECTRICAL ENGINEERING Pages: 36-44 Issue №10450
STUDYING ENERGY EFFICIENCY OF A-TIG WELDING OF STAINLESS STEELS WITH USING OF INDIVIDUAL FLUX-OXIDES
argon arc welding
stainless steel
individual fluxes are oxides
thermodynamic and physico-chemical properties of oxides
energy efficiency preplasma ability of the arc
Show more