The concept of fuel system’s mathematical modeling based on certification requirements
( Pp. 45-51)
More about authors
Grachev Sergej V.
zamestitel direktora direkcii perspektivnyh nauchnyh programm
Moscow Aviation Institute (National Research University) Smagin Denis I. nachalnik laboratorii NIO-101
Moscow Aviation Institute (National Research University) Savelev Roman S. veduschiy inzhener
Moscow Aviation Institute (National Research University) Napreenko Konstantin S. inzhener 2-y kategorii
Moscow Aviation Institute (National Research University) Zinina Anna I. tehnik
Moscow Aviation Institute (National Research University)
Moscow Aviation Institute (National Research University) Smagin Denis I. nachalnik laboratorii NIO-101
Moscow Aviation Institute (National Research University) Savelev Roman S. veduschiy inzhener
Moscow Aviation Institute (National Research University) Napreenko Konstantin S. inzhener 2-y kategorii
Moscow Aviation Institute (National Research University) Zinina Anna I. tehnik
Moscow Aviation Institute (National Research University)
Abstract:
The article discusses the concept of fuel system’s mathematical modeling based on certification requirements. A detailed description of the safety of aircraft operation, taking into account the standard of airworthiness, and methods for conformity assessment of certification has also been presented. The development concept modeling is not possible to without a methodology to construct an integrated mathematical model which presents a solution using a one-dimensional and three-dimensional functioning model. The combined calculation in a one-dimensional and three-dimensional setting allows the modulating of the refuelling process with drainage system, signaling and centralized fuelling management process. Also as the calculation results of simulation of fuel flow from tanks when one pump fails are shown. Dynamic simulation of fuel production from tanks for calculation of static change fuel static moment and geometric modelling of non-working and non-poured remainder also presented. The article analysed fuel system requirements. This conformity can be met using a complex of mathematical modeling tools.
How to Cite:
Grachev S.V., Smagin D.I., Savelev R.S., Napreenko K.S., Zinina A.I., (2020), THE CONCEPT OF FUEL SYSTEM’S MATHEMATICAL MODELING BASED ON CERTIFICATION REQUIREMENTS. Computational Nanotechnology, 3 => 45-51.
Reference list:
Innovatsionnye protsessy. Model ot stadii do vykhoda ot idei do zapuska. Standart po sisteme Stage-Gate. http://stage-gate.com
Prikaz ministerstva transporta Rossiyskoy Federatsii ot 20 fevralya 2003 g. № 19 Ob utverzhdenii Federal nykh aviatsionnykh pravil Sertifikatsiya nazemnoy aviatsionnoy tekhniki .
Upravlenie poletom ot 01 yanvarya 2014. Onlayn. www.faa.gov
Akhmetshin T.F. Tekst nauchnoy stat i po spetsial nosti Mekhanika i mashinostroenie . Sertifikatsiya aviatsionnoy tekhniki. UDK 629.7:658.516.
Makovetskiy M.B., Pugachev YU.N. Osnovnye trebovaniya k avariestoykoy toplivnoy sisteme vertoleta // 14-ya Mezhdunarodnaya konferentsiya Aviatsiya i kosmonavtika-2015 . 16-20 noyabrya 2015 g. M.: Tezisy; Tipografiya Lyuksor , 2015. 520 s.
Kartashov B.A., SHabaev E.A., Kozlov O.S., SHCHekaturov A.M. Sreda dinamicheskogo modelirovaniya tekhnicheskikh sistem SimInTech. M.: DMK Press, 2017. 424 s.
Satin A., Savel ev R., Smagin D. Prilozhenie SimInTech Software dlya optimizatsii parametrov toplivnoy sistemy perspektivnogo vertoleta // Tezisy dokladov XXIII Mezhdunar. nauch. konf. Sistemnyy analiz, upravlenie i navigatsiya .
Sundararadzhan V. CHto takoe modelirovanie i simulyatsiya, a takzhe razrabotka programmnogo obespecheniya // TSentr razvitiya i peredovykh vychisleniy. 2012. T. 1. Vyp. 1. S. 1-5.
SimInTech Manual. http://simintech.ru
Vargaftik N.B. Spravochnik fizicheskikh svoystv zhidkostey i gazov. 2-e izd. M., 1972. 721 s.
Zaytseva T.YU., Smagin D.I., Savel ev R.S. Reshenie zadach optimizatsii vneshnego vida agregatov tipa plamegasitel s ispol zovaniem peredovykh proizvodstvennykh tekhnologiy // 10-ya Mezhdunar. konf. po mashinostroeniyu i aerokosmicheskoy tekhnike (ICMAE). Bryussel , Bel giya, 2019. S. 247-251.
Mariya A.Vvedenie v modelirovanie i simulyatsiyu // Mater. 29-y konf. po zimnemu modelirovaniyu. Dekabr 1997. S. 7-13.
Aver yanov I.O., Zinin A.V., Kuznetsov V.M. i dr. Zadacha proektirovaniya avariestoykoy toplivnoy sistemy vertoleta // Materialy XXII mezhdunar. simpoziuma Dinamicheskie i tekhnologicheskie problemy mekhaniki konstruktsiy i sploshnykh sred im. A.G. Gorshkova. Moskovskiy aviatsionnyy institut (Natsional nyy issledovatel skiy universitet). M.: OOO TRP , 2016.
Bretshnayder S. Svoystva gazov i zhidkostey. Inzhenernye metody rascheta / per. s pol sk,; pod red, P.G. Romankova. L.: KHimiya (Leningr. otd.), 1966. 536 s.
Prikaz ministerstva transporta Rossiyskoy Federatsii ot 20 fevralya 2003 g. № 19 Ob utverzhdenii Federal nykh aviatsionnykh pravil Sertifikatsiya nazemnoy aviatsionnoy tekhniki .
Upravlenie poletom ot 01 yanvarya 2014. Onlayn. www.faa.gov
Akhmetshin T.F. Tekst nauchnoy stat i po spetsial nosti Mekhanika i mashinostroenie . Sertifikatsiya aviatsionnoy tekhniki. UDK 629.7:658.516.
Makovetskiy M.B., Pugachev YU.N. Osnovnye trebovaniya k avariestoykoy toplivnoy sisteme vertoleta // 14-ya Mezhdunarodnaya konferentsiya Aviatsiya i kosmonavtika-2015 . 16-20 noyabrya 2015 g. M.: Tezisy; Tipografiya Lyuksor , 2015. 520 s.
Kartashov B.A., SHabaev E.A., Kozlov O.S., SHCHekaturov A.M. Sreda dinamicheskogo modelirovaniya tekhnicheskikh sistem SimInTech. M.: DMK Press, 2017. 424 s.
Satin A., Savel ev R., Smagin D. Prilozhenie SimInTech Software dlya optimizatsii parametrov toplivnoy sistemy perspektivnogo vertoleta // Tezisy dokladov XXIII Mezhdunar. nauch. konf. Sistemnyy analiz, upravlenie i navigatsiya .
Sundararadzhan V. CHto takoe modelirovanie i simulyatsiya, a takzhe razrabotka programmnogo obespecheniya // TSentr razvitiya i peredovykh vychisleniy. 2012. T. 1. Vyp. 1. S. 1-5.
SimInTech Manual. http://simintech.ru
Vargaftik N.B. Spravochnik fizicheskikh svoystv zhidkostey i gazov. 2-e izd. M., 1972. 721 s.
Zaytseva T.YU., Smagin D.I., Savel ev R.S. Reshenie zadach optimizatsii vneshnego vida agregatov tipa plamegasitel s ispol zovaniem peredovykh proizvodstvennykh tekhnologiy // 10-ya Mezhdunar. konf. po mashinostroeniyu i aerokosmicheskoy tekhnike (ICMAE). Bryussel , Bel giya, 2019. S. 247-251.
Mariya A.Vvedenie v modelirovanie i simulyatsiyu // Mater. 29-y konf. po zimnemu modelirovaniyu. Dekabr 1997. S. 7-13.
Aver yanov I.O., Zinin A.V., Kuznetsov V.M. i dr. Zadacha proektirovaniya avariestoykoy toplivnoy sistemy vertoleta // Materialy XXII mezhdunar. simpoziuma Dinamicheskie i tekhnologicheskie problemy mekhaniki konstruktsiy i sploshnykh sred im. A.G. Gorshkova. Moskovskiy aviatsionnyy institut (Natsional nyy issledovatel skiy universitet). M.: OOO TRP , 2016.
Bretshnayder S. Svoystva gazov i zhidkostey. Inzhenernye metody rascheta / per. s pol sk,; pod red, P.G. Romankova. L.: KHimiya (Leningr. otd.), 1966. 536 s.
Keywords:
Mathematical model, certification, fuel system, helicopter.
Related Articles
Mathematical Modeling, Numerical Methods and Complex Programs Pages: 48-56 DOI: 10.33693/2313-223X-2024-11-1-48-56 Issue №95355
Mathematical Model of Economic Information
mathematical model
economic information
information field topology
economic utility
Show more
Computer Modeling and Design Automation Pages: 34-41 DOI: 10.33693/2313-223X-2021-8-4-34-41 Issue №20323
Computer Simulation of Oscillatory Processes Created by a Planetary Vibroprive with Kinematically Unbalanced Masses in Machines for Mixing Liquid Mixtures
vibrodrive
oscillatory processes
mathematical model
mixing of liquid media
Show more
Multiscale modeling for information control and processing Pages: 37-44 DOI: 10.33693/2313-223X-2020-7-3-37-44 Issue №17377
Modeling the hydraulic characteristics of drain valve and burst fitting of an aircraft accident-resistant fuel system
Mathematical model
drain valve
bursting fitting
accident-proof fuel system
helicopter
Show more
Automation of Manufacturing and Technological Processes Pages: 63-71 DOI: 10.33693/2313-223X-2023-10-4-63-71 Issue №47939
Control System for Waterjet Cutting Process with Swirling Working Fluid Jet
waterjet cutting
fatigue chipping
jet oscillation
abrasive
cutting scratching
Show more
4. MATHEMATICAL AND INSTRUMENTAL METHODS OF ECONOMICS 08.00.13 Pages: 65-72 Issue №19146
FORECASTING FINANCIAL MARKETS USING CONVENTIONAL NEURAL NETWORK
financial market forecasting
machine learning
convolutional neural network
mathematical model
algorithm
Show more
ECONOMICS AND NATIONAL ECONOMY MANAGEMENT, MARKETING, MANAGEMENT Pages: 131-133 Issue №2286
PRODUCT CERTIFICATION AS A TOOL OF COMPETITIVENESS MACHINE-TOOL ENTERPRISES
certification
competitiveness
management tool
the external environment
design
Show more
8. Forensics; Forensic expertise; Operational and search activities Pages: 168-171 Issue №5215
ABOUT ACTIVITY OF THE NON-STATE JUDICIAL AND EXPERT ESTABLISHMENTS IN THE RUSSIAN FEDERATION
forensic examination
it is judicial-expert establishment
expert
certification
competence
Show more
12. Forensics; Forensic expertise; Operational and search activities; Criminal procedure Pages: 215-218 Issue №6841
ABOUT IMPROVEMENT OF LEGAL REGULATION OF JUDICIAL AND EXPERT ACTIVITY IN THE SPHERE OF FORENSIC MEDICINE
special knowledge
forensic organization
a forensic examination
expert
certification
Show more
12. OTHER Pages: 225-228 Issue №5413
On improvement of legislation in the field of legal termination of service in the penal system
the penal system
service contract
dismissal
misconduct
certification
Show more
12. OTHER Pages: 319-322 Issue №3370
Development of standardization and certification systems in the member states of the CIS
standardization
certification
CIS
regulatory documents
international organization
Show more