METHODS OF TESTING RING SAMPLES MADE OF PLASTIC COMPOSITE MATERIALS USED IN THE AVIATION INDUSTRY AND THE ESTIMATED EVALUATION OF THEIR EFFECTIVENESS
( Pp. 66-71)

More about authors
Polovin Mikhail Mikhailovich veduschiy inzhener - konstruktor
PJSC Irkut Corporation Nazarov Egor Vadimovich nachalnik laboratorii «Kompozicionnye materialy» NIO-101
Moscow Aviation Institute (National Research University) Zhuravlev Evgeniy Vasilyevich nachalnik laboratorii «Upravlenie zhiznennym ciklom izdeliya» NIO-101
Moscow Aviation Institute (National Research University) Shavelkin Denis Sergeevich assistent kafedry 101 «Proektirovanie i sertifikaciya aviacionnoy tehniki»
Moscow Aviation Institute (National Research University)
For read the full article, please, register or log in
Abstract:
In relation to the increase in the proportion of composite materials used in the design of modern aircraft, the most acute issue is the issue of confirming the characteristics of materials during their testing. In this paper, the methods of testing composite materials used in the elements of the glider design are analyzed, and the estimated assessment of the methods analyzed is made.Within the limits of the given work the comparative analysis of existing and perspective methods of carrying out of tests of ring samples from composite materials for the purpose of an estimation of their efficiency regarding definition of mechanical properties is carried out. The advantages and disadvantages of each method are determined.
How to Cite:
Polovin M.M., Nazarov E.V., Zhuravlev E.V., Shavelkin D.S., (2019), METHODS OF TESTING RING SAMPLES MADE OF PLASTIC COMPOSITE MATERIALS USED IN THE AVIATION INDUSTRY AND THE ESTIMATED EVALUATION OF THEIR EFFECTIVENESS. Computational Nanotechnology, 4 => 66-71. DOI: 10.33693/2313-223X-2019-6-4-68-71
Reference list:
Gunyaev G.M., Krivonos V.V., Rumyantsev A.F., ZHelezina G.F. Polimernye kompozitsionnye materialy v konstruktsiyakh letatel nykh apparatov. VIAM, 2003. Gunyaev G.M., Krivonos V.V., Rumyantsev A.F., Zhelezina G.F. Plastics composite materials in aircraft structures. VIAM, 2003.
Afanas ev D.V., ZHumabaev M.ZH., Karimbaev T.D., Petrov YU.A., Polovin M.M. Mnogosloynye tsilindry i diski. TSIAM, 2001. Afanasiev D.V., Zhumabaev M.J., Karimbayev T.D., Petrov Y.A., Polovin M.M. Multilayer cylinders and disks. CIAM, 2001.
Karimbaev T.D. Usilennye kompozitsionnym materialom konstruktsii rotorov. Novye tekhnologicheskie protsessy i nadezhnost v GTD. Vyp. 1. 2000. Karimbayev T.D. Reinforced with composite material of rotor design. New technological processes and reliability in GTE. Is. 1. 2000.
Tarnapol skiy YU.M., Kintsinis T.YA. Metody staticheskikh ispytaniy armirovannykh plastikov. Riga: KHimiya, 1969. Tarnapolsky Y.M., Kincinis T.Ya. Methods of static testing of reinforced plastics. Riga: Chemistry, 1969.
Tarnapol skiy YU.M., Kintsis T.YA. Metody staticheskikh ispytaniy armirovannykh plastikov. Riga: KHimiya, 1981. Tarnapolsky Y.M., Kintsis T.Ya. Methods of static testing of reinforced plastics. Riga: Chemistry, 1981.
Karimbaev T.D., Salina N.V. Issledovaniya deformirovannogo sostoyaniya mnogosloynykh prostavok iz perspektivnykh materialov s uchetom plastichnosti. Tekhnicheskiy otchet TSIM № 111000. M., 1998. Karimbayev T.D., Salina N.V., Studies of the deformed state of multilayer spacers made of perspective materials considering plasticity. CIM Technical Report No. 111000. Moscow, 1998.
Vardar O., Finnie I. An analysis of the Brazilian disk fracture test using the Weibull probabilistic treatment of brittle strength. International Journal of Fracture. 1975. Vol. 1. No. 3.
Lekhnitskiy S.G. Teoriya uprugosti anizotropnogo tela. M.: Nauka, 1977. Lekhnitsky S.G., Theory of Anisotropic Body Elasticity. Moscow: Science, 1977.
Keywords:
Composite materials, CM sample testing methods, performance evaluation, express method.


Related Articles

Issue №16932
Computational and experimental method for determining the structural appearance of transmission shafts made using composite materials
composite materials drive shafts finite element analysis racing car
Show more
Issue №15743
METHODS OF TESTING RING SAMPLES MADE OF PLASTIC COMPOSITE MATERIALS USED IN THE AVIATION INDUSTRY AND THE ESTIMATED EVALUATION OF THEIR EFFECTIVENESS
Composite materials CM sample testing methods performance evaluation express method
Show more