Computational and experimental method for determining the structural appearance of transmission shafts made using composite materials
( Pp. 71-78)

More about authors
Eremin Valentin P. inzhener laboratorii № 2 «Kompozicionnye materialy i konstrukcii» NIO-101
Moscow Aviation Institute (National Research University) Bolshikh Alexander A. inzhener laboratorii № 2 «Kompozicionnye materialy i konstrukcii» NIO-101
Moscow Aviation Institute (National Research University) Shkurin Maksim V. starshiy prepodavatel kafedry «Proektirovanie i sertifikaciya aviacionnoy tehniki»
Moscow Aviation Institute (National Research University)
For read the full article, please, register or log in
Abstract:
This computational and experimental work is dedicated to the development of promising designs of vehicle drive shafts made of polymer composite materials. The paper analyzes the existing models of drive shafts vehicles and substantiates the use of a carbon-fiber drive shaft with titanium tips. A manufacturing technology for such a product is also presented. Evaluation of structure performance under the action of ultimate loads was carried out by the finite element method considering anisotropic properties of reinforced materials. Prototypes of composite drive shafts were produced for further laboratory tests. According to the tests results, the drive shafts withstands a greater torsional moment than the calculated one. As a result, it was decided to install them on a racing vehicle for carrying out field tests. During the field tests of the composite drive shaft, the mounting structure between titanium tip and composite tube was destroyed. During the full-scale tests there were no loads exceeding 60% of the calculated ones, therefore, the main cause of structural failure is fatigue failure. The next stage of the research was the development of a design that is resistant to long-term cyclic loads and has sufficient reliability. This design was designed, manufactured and tested in the framework of field tests.
How to Cite:
Eremin V.P., Bolshikh A.A., Shkurin M.V., (2020), COMPUTATIONAL AND EXPERIMENTAL METHOD FOR DETERMINING THE STRUCTURAL APPEARANCE OF TRANSMISSION SHAFTS MADE USING COMPOSITE MATERIALS. Computational Nanotechnology, 2: 71-78. DOI: 10.33693/2313-223X-2020-7-2-71-78
Reference list:
Chandrakant P., Nayan G. Design analysis of composite material shaft in automobile: A review // International Journal for Scientific and Research and Development. 2014. No. 2 (10). Pp. 149-151.
Afanas ev B.A., Dashtiev I.Z. Proektirovanie elementov avtomobilya iz polimernykh kompozitsionnykh materialov: ucheb. posobie / pod red. B.A. Afanas eva. M.: Izd-vo MGTU im. N.E. Baumana, 2006. 92 s.: il.
Jebakani D., Paul Robert T. Particle swarm optimization for RBDO of composite drive shaft // European Journal of Scientific Research. 2011. Vol. 62. Is. 2. P. 294.
Hatwar P.K., Dr. Dalu R.S. Design and analysis of composite drive shaft: A review // International Journal for Scientific and Research and Development. 2015. No. 3 (1). Pp. 1294-1297.
Kassapoglou Ch. Design and analysis of composite structures with applications to aerospace structures. The Netherlands: Delft University of Technology, 2010.
Parshuram D., Mangsetty S. Design and analysis of composite. Hybrid drive shaft for automotives // The International Journal of Engineering and Science. 2013. No. 2 (1). Pp. 160-171.
Vasil ev V.V. Mekhanika konstruktsiy iz kompozitsionnykh materialov. M.: Mashinostroenie, 1988. 272 s.
Viroliya C.C., Viroliya V.C. (C.V. Patel). A review on Design and development of composite drive shaft // International Journal of Advancements in Research Technology. December, 2018. Vol. 7, Is. 1,
Moorthy S., Mitiku Y., Sridhar K. Design of Automobile Driveshaft using Carbon/Epoxy and Kevlar/Epoxy Composites // American Journal of Engineering Research. 2013. No. 2 (10). Pp. 173-179.
Proektirovanie polnoprivodnykh kolesnykh mashin: ucheb. dlya vuzov. V 3 t. / B.A. Afanas ev i dr. ; Pod obshch. red. d-ra tekhn. nauk, prof. A.A. Polungyana. M.: Izd-vo MGTU im. N.E. Baumana, 2008.
Bhajantri V.S., Bajantri S.C., Shindolkar A.M., Amarapure S.S. Design and analysis of composite drive shaft. 2014.
Manjunath K., Mohan S.K., Channakeshava K.R. Optimization and simulation of composite driveshaft for automobile applications // International Journal of Mechanical Engineering and Technology. 2010. No. 1 (1). Pp. 76-94.
Kompozitsionnye materialy: spravochnik / V.V. Vasil ev i dr. ; pod red. V.V. Vasil eva, YU.M. Tarnopol skogo. M.: Mashinostroenie, 1990. 512 s.
Gebresilassie A. Design and analysis of composite drive shaft for rear-wheel drive engine. May, 2012. Vol. 3. Is. 5.
Kaw A.K. Mechanics of composite materials. Boca Raton (Florida): Taylor Francis Group, 2006. 457 p.
Pedro P. Camanho Failure criteria for fibre-reinforced polymer composites. URL: http://paginas.fe.up.pt/ stpinho/teaching/feup/y0506/fcriteria.pdf (data obrashcheniya: 07.12.16).
Kollar L.P., Springer G.S. Mechanics of composite structures. Cambridge University Press, 2003.
Keywords:
composite materials, drive shafts, finite element analysis, racing car.