Control System for Waterjet Cutting Process with Swirling Working Fluid Jet
( Pp. 63-71)

In mechanical engineering, the procurement process is one of the most important in the life cycle stage of manufacturing products from metal materials. In this regard, there are disadvantages in the manufacture of parts: low productivity, complexity and high cost of cutting tools, and the impossibility of cutting. The work proposes an approach to increase the productivity of using the cutting properties of abrasive grains and expanding the contact area of a waterjet jet with the workpiece surface being processed by twisting the jet and adjusting the values of the jet oscillation frequency to the thickness of the workpiece. As a result of research verification, the approach showed good prediction accuracy.

Ivanov V.V., Kalashnikov E.A. Control System for Waterjet Cutting Process with Swirling Working Fluid Jet. Computational Nanotechnology. 2023. Vol. 10. No. 4. Pp. 63–71. (In Rus.) DOI: 10.33693/2313-223X-2023-10-4-63-71. EDN: JJTNCG

Ivanov V.V., Ivanov S.V., Ivanov Vl.V. Simulation experimental studies of the amount of metal removal from waterjet processing modes using information technologies. Computational Nanotechnology. 2015. No. 4. Pp. 74–78. (In Rus.)
Ivanov V.V., Kalashnikov E.A., Bakradze L.G. Control system for the waterjet cutting process. Path of Science. In­ternational Scientific Journal. 2023. No. 5 (111). Pp. 24–27. (In Rus.)
Ivanov V.V., Ivanov S.V. A program for calculating and constructing an optimal technological process for waterjet cutting by swirling a jet of working fluid. Certificate of state registration of the computer program No. 2020617624, 07/08/2020.
Ivanov V.V. Development of an automated software and hardware complex for intelligent support and optimal configuration of waterjet machines with numerical control. Computational Nanotechnology. 2015. No. 2. Pp. 55–61. (In Rus.)
Ivanov V.V., Vasin A.N., Iznairov B.M. Method of waterjet processing with jet oscillation. Pat. 2688007 of Russian Federation No. 2017143280, 12/11/2017. Publ. 05/17/2019. Bull. No. 14.
Korolev A.V. Study of the formation processes of tool and part surfaces during abrasive processing. Saratov: Publishing House of the Saratov University. 1975. 191 p.
Shpilev V.V., Reshetnikov M.K. Modeling of a heterogeneous jet during waterjet cutting. Bulletin of the Saratov State Technical University. 2011. No. 3 (58). Pp. 154–158. (In Rus.)
Shpilev V.V., Reshetnikov M.K., Bereda N.N. Modeling of a swirling waterjet jet during waterjet cutting. Bulletin of the Saratov State Technical University. 2011. No. 2 (56). P. 163–168. (In Rus.)

waterjet cutting, fatigue chipping, jet oscillation, abrasive, cutting scratching, productivity, mathematical model.