DEVELOPMENT OF THE SYSTEM OF REGULATION IMPLEMENTED ON THE PRINCIPLES OF STRUCTURAL AND PARAMETRIC ADAPTATION
( Pp. 114-116)

The paper presents a theoretical substantiation of the possibility of using laws the adaptive control of hydraulic equipment. Is expected due to the change of pressure in the hydraulic system, to change the modes of operation of the hydraulic press is based on a mathematical model with the aim of improving product quality, reduce energy consumption and increase the life of the equipment. As an environment and programming language of the controller was chosen: development environment CoDeSeS with the programming language C++ and MATLAB/simulink.

Denisov M.S., (2017), DEVELOPMENT OF THE SYSTEM OF REGULATION IMPLEMENTED ON THE PRINCIPLES OF STRUCTURAL AND PARAMETRIC ADAPTATION. Computational Nanotechnology, 2 => 114-116.

SHalyto A.A. Tekhnologiya avtomatnogo programmirovaniya / Trudy pervoy Vserossiyskoy nauchnoy konferentsii Metody i sredstva obrabotki informatsii M.: MGU. 2003. http://is.ifmo.ru/works /tech aut prog/
Angeline P. J., Pollack J. Evolutionary Module Acquisition // Proceedings of the Second Annual Conference on Evolutionary Programming. 1993. http://www.demo.cs.brandeis.edu/papers/ep93.pdf
Jefferson D., Collins R., Cooper C., Dyer M., Flowers M., Korf R., Taylor C., Wang A. The Genesys System. 1992. www.cs.ucla.edu/ dyer /Papers/AlifeTracker/Alife91Jefferson.html
Chambers L. Practical Handbook of Genetic Algorithms. Complex Coding Systems. Volume III. CRC Press, 1999.
Gladkov L.A., Kureychik V.V., Kureychik V.M. Geneticheskie algoritmy. M.: Fizmatlit, 2006.
Koza J. R. Genetic programming: on the programming of computers by means of natural selection. MIT Press, 1992.
De Jong K. An analysis of the behavior of a class of genetic adaptive systems. PhD thesis. Univ. Michigan. Ann Arbor, 1975.
KHopkroft D., Motvani R., Ul man D. Vvedenie v teoriyu avtomatov, yazykov i vychisleniy. M.: Vil yams, 2002.
Rassel S., Norvig P. Iskusstvennyy intellekt: sovremennyy podkhod. M.: Vil yams, 2006.

the adaptive controller, process control, hydraulic equipment, automation, programming.